Shielding paint for shielding high-frequency radiation (HF) and low-frequency electric fields (LF). Breathable, solvent-free, plasticizer-free and low-emission.
 
Shields against radiofrequency radiation (HF) from mobile phone site antennas including 5G, Bluetooth, WiFi, Smart Meters and other wireless devices.  Also shields against electrical fields (LF) from home wiring and other sources.
 
Standard paint with the best all-round properties – one paint suitable for everything. Up to 90 dB at 40 GHz. TÜV-SÜD certified. Extremely high shielding in all situations. Suitable for very difficult substrates due to its high adhesive tensile strength. This paint is very finely pigmented, very easy to process and forms a finely blended hard film. The HSF54 forms the most even surface out of all our shielding paints.
 
Screening attenuation
At a yield of 4 sqm/l:
At 1 GHz: Single layer 44 dB | Double layer 53 dB | Three layer 60 dB
At a yield of 8 sqm/l:
At 1 GHz: Single layer 39 dB | Double layer 46 dB | Three layer 51 dB
 
Underground
Excellent adhesion on almost all substrates interior and exterior.
 
Top coating
Preferably covered with plastic bonded water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints.
 
Optional: Fiber additive AF3
For crack bridging and a better grounding we advise our fiber additive AF3 with long conductive carbon fibers.
 
Frost resistance
This product is frost resistant (proved for 5 frost-/thaw cycles) and can be shipped throughout the year by air cargo or ship.
 
Ingredients
Water, natural graphite, pure acrylics dispersion, carbon black, additives, preservative (BIT, INN, MIT).
 
Technical data
Please find detailled data in the table overview and the technical data sheet.
 
No nanotechnology
Our shielding paints are developed in accordance with strict ecological criteria. We use, for example, the carbon black with the lowest emission possible on the market and untreated natural graphite. We consciously do not use graphene, a nanomaterial where the hazard potential is still completely unknown.
 
TÜV-SÜD certification
We have our shielding paints monitored by TÜV-SÜD. The whole production process including quality control, emission behaviour and economical use of preserving agents is subject to monitoring. 
 
Grounding
Grounding required; there are some accessories required in order to ground the paint: Interior grounding kit GF3 and Grounding Tape - GSX10 / GSX50
 
Installation:
Engage a local licenced electrician to complete the grounding
When the shielding paint is installed, its location, quantity and proper installation should be determined by a trained EMF specialist like Safer EMF. This paint will reflect Radio Frequency Radiation and improper installation can result in increased exposure. 
In order to ensure optimum screening performance, the specialist or consultant should assess the living space for Radio Frequency “RF” Radiation and AC Electric Fields. Before and after measurements are important to determine the overall effectiveness of the shield. 
CAUTION This paint is electrically conductive. All painted areas must be grounded by a licensed electrician. All connections should be visually inspected and tested, and comply with local electrical codes. In all shielded areas / shielded rooms, a personal protection circuit-breaker should be installed. Always switch off power supply before starting to perform shielding work, and before application of shielding paint. For ground only, use Safe and Sound Ground-Connection ES/EB. Avoid contacting ground at other points.